Adelco Spyder II Direct to Screen Printing Machine

Spyder II

The Direct to Screen System offers a streamlined interface, increased speed, greater mechanical precision and production efficiency.

Key features of the Spyder II

  • Eliminates FIlm
  • Reduced Labour Costs
  • Precision Placement
  • Faster Press Setup
  • Reduced Exposure Times
Adelco Spyder II Direct to Screen Printing Machine

Direct to Screen Printer improving print quality

The Adelco Spyder II delivers the ultimate in quality and simplifies the process of creating screen masks. Perfect for a busy screen room or any screen printer needing to eliminate film, reduce labour and speed up turnaround time, our high definition device can image screen over two square ft per minute, for ultrafast throughput.

The Spyder II uses heated wax ink, with a robust phase change ink jet head technology, to place a high density image directly on to a coated screen. The system can print upto 1200 dpi, allowing halftone frequencies up to 110 dpi.

There are two variants of the Adelco Spyder II, the DTS 30 which supports standard frames up to 30” x 40”, while the larger DTS 52 supports frame sizes up to 56” x 50”.

Streamlined Interface & Speedy Printing

With easy to use touch screen controls, the streamlined interface makes the Adelco Spyder II very intuitive. We have revised the electronics in the new Spyder model, to provide a simplified structure, improved performance control and long term reliability.

Spyder II RIP software options include Exile Screen maker RIP for windows or a fully featured Harlequin RIP for Max OSX or Windows both provide fast and reliable processing of Postscript and PDF files. The Spyder II also accepts 1-bit Tiff files from any other RIP so it will easily fit into an exisiting pre-press workflow.

The Spyder II boasts increased speed, resulting in improved throughput, greater precision and production efficiency, while at the same time the enhanced dot placement improves print quality further.

Full features and advantages of the Adelco Spyder II

  • Can image screens at over two sq ft per minute for ultra fast throughput
  • Robust phase-change inkjet head technology
  • The system can print upto 1200 dpi, allowing halftone frequencies up to 110 dpi
  • Spyder II RIP software options include Exile Screen maker RIP for windows or a fully featured Harlequin RIP for Max OSX or Windows.

Specs

Resolution 600 dpi and 1200 dpi
Halftone capability 75 lpi @600 dpi / 110 lpi @1200 dpi
Imaging Speed Approximately 2.5 sq ft/min (14sq m/hr @600dpi Approximately 1.5 sq ft/min (8 sq m/h) @ 1200 dpi
Accuracy .001 inch from screen to screen
Power requirments 120v/220v 50-60 Hz 15 amp
Compressed Air Required
Operatating Tempreture 50°F to 86°F / 10°C to 30°C
Operating Humidity 35% to 75% non-condensing
Ink Type Solid block / water dispersable photo resist mask

Make an enquiry now

Register your interest in the Spyder II now. We guarantee you won't be disappointed.